DXi9200 Site Planning

The following licenses are pre-installed when ordered with the DXi9200 System:

License	Description
VTL	Enables the VTL interface. All VTL licenses are factory installed.
NAS	Enables NAS (NFS, CIFS/SMB) and Application Shares connectivity.
Backup Application Specific (PTT)	Enables the backup application-specific path-to-tape capability.
Data Deduplication	Enables data deduplication and compression.
Replication	Enables replication to other DXi systems.
Storage Capacity	Enables the purchased storage capacity for the system. License key for 110 TB storage capacity is pre-installed on all DXi9200 system configurations, up to a total of 2200 TB in 55 TB increments. Usable storage capacity can be upgraded at any time after purchase by adding a storage capacity upgrade license to enable installed hardware capacity, up to a total of 2200 TB. DXi9200 System storage capacity can be expanded from 110 TB to a total of 2200 TB in a configuration using two Array Modules in 55 TB increments. Note: If you purchase a storage capacity upgrade, you will receive a License Certificate you can use to enable the additional capacity (see Installing the Storage Capacity License).
OST	Enables OpenStorage backup with Veritas OST.
Data-at-Rest Encryption	Enables the use of the Data-at-Rest Encryption capability to secure all data stored on the DXi9200. Data-at-Rest Encryption uses Self Encrypting Drive (SED) technology to secure all data stored on the DXi9200. This includes backup file data. When Data-at-Rest Encryption is enabled, all hard drives in the DXi are paired with the disk controllers using encryption keys. After this, accessing data on the drives requires the same encryption keys and controllers that were used to write the data. This ensures that a drive that is physically removed from the DXi cannot be read using another system or device. Non-SED systems do not have or need this license.
Dynamic Application Environment (DAE)	Enables the use of a virtual machine environment on the DXi9200.
Data-in-Flight Encryption	Enables use of AES encryption (128-bit, 256-bit, or TLS with AES 256) when sending data to another system using DXi replication or OST Accent.
Veeam	Enables integration of Veeam Backup and Replication with the DXi9200. See DXi-Series Configuration and Best Practices Guide for Veeam Backup & Replication on the Best Practices > DXi Best Practices Guides page.

Quantum’s DXi Accent software accelerates backups and reduces network bandwidth requirements by distributing deduplication between the backup server and DXi appliances. With DXi Accent, backup windows are reduced and network bottlenecks are eliminated.

To use DXi Accent, you must install the Quantum OST Client Plug-in on the media server. For information about installing the OST Plug-in and using DXi Accent, see OST Plug-in Configuration.

The DXi Cloud Share feature allows DXi systems to store deduplicated backup data sets to any S3 compliant public or private cloud; providing up to 70 times more efficient use of cloud storage space.

One-Year Warranty. Service Requests (SRs) can be submitted via Quantum's Online Service Request Form or telephone 24x7x365. SRs will receive a response no later than the next business day. Telephone support will include diagnosis of covered warranty issues and parts replacement. Replacement parts will be shipped within one business day of Quantum's determination that a replacement part is required. Customer will perform the replacement and return of all identified CRU (Customer Replaceable Unit) components. Identified FRU (Field Replaceable Unit) components will be replaced onsite by a Quantum Field Engineer or Authorized Service Provider, with a next business day onsite response. Onsite support for FRU replacement is provided on a Next Business Day (excluding weekends, evenings and holidays) response following determination, by Quantum, that FRU replacement is the right action to resolve the equipment or operational problem that led to the creation of the Service Request. Support includes the rights for the customer to receive new software releases applicable to registered equipment under this warranty.

Customer Replaceable Units (CRUs) Note: Your specific CRUs are dependent on your DXi9200 system and configuration.

Node bezel Array Module bezel Array Module (RBOD) chassis Array Module (RBOD) rack mount rails Array Module (RBOD) power supply Array Module (RBOD) power cable Array Module (RBOD) fan Array Module (RBOD) 20 TB drive Array Module (RBOD) control module 10/25 GbE network card (SFP28 optical or DAC copper) 10/25 GbE network cable 100 GbE network card (SFP28 optical or DAC copper) 100 GbE network cable 32 Gb Fibre Channel network card.

Note: The above lists may not be comprehensive. For additional information on CRUs and FRUs, please contact your Quantum sales representative.

Quantum’s Global Service organization is geared towards delivering the fastest possible response and root cause resolution, helping you maximize your backup investments, better manage processes, and make the best use of your resources. We ensure total customer satisfaction by providing comprehensive, responsive services on a worldwide basis.

Quantum service engineers are available around the world and are deployed to respond to onsite service demands. In addition, spare part depots are strategically located across the globe; service technicians have access to the parts and equipment necessary to maintain or repair your DXi9200.

Quantum Support Options

Cloud-Based Analytics (CBA) is the latest technology for ensuring world class support for Quantum DXi products.

For an overview of CBA Capabilities, see Enable and Disable Cloud-Based Analytics. To configure CBA for your system, complete the steps in Configure Cloud Based Analytics (CBA).

Quantum offers a variety of support options to meet a range of budget and availability requirements:

You can initiate (CBA) from the DXi GUI using the steps in Configure Cloud Based Analytics (CBA).

Quantum recommends configuring the Email Reports capability to automatically send XML-based reports to e-mail recipients.

The report represents a snapshot of the system information at the time the report is generated. Quantum recommends generating and saving a report before performing a software upgrade or reconfiguring the system.

DXi Advanced Reporting, which is included on all DXi appliances, sets new standards for onboard intelligence by giving users a detailed view of internal appliance operations and provides them with years of backup and replication data for extended trend analysis. DXi Advanced Reporting reduces administration time, improves operations, streamlines performance tuning, and helps users maximize the value of their DXi appliances.

	DXi Node	Array (RBOD) Modules
Height	2U 3.42 in. 8.68 cm	5U 8.65 in. 22 cm
Width (side to side)	17.1 in. 43.4 cm	19.0 in. 48.3 cm
Depth (front to back)	29.0 in. 73.7 cm	38.6 in. 98 cm
Weight (stand alone)	79.6 lb 36.1 kg	No Drives - 180 lb (81.6 kg) Drives - Up to 298 lb (135 kg)
Rack Space Required	2U	5U
Air Clearance	Open 4 in (10.2 cm) behind unit for proper air flow

DXi9200
Usable Capacity	From 110 TB to 2200 TB
Capacity Increments	The Array Modules RBODs) provides up to 2200 TB of usable capacity, licensable in 55 TB increments.

Ethernet Cable Drops	(2 x 1GbE ports) - Two 1 GbE Ethernet connections for service/management operations. (4 to 16 x 10/25 GbE ports) - (SFP28 optical or DAC copper) for NAS, Application Specific, OST, and replication connectivity. (2 to 8 x 100 GbE ports) - (SFP28 optical or DAC copper) for NAS, Application Specific, OST, and replication connectivity. Note: For Cisco 5000 Series Data Center Class switches, Quantum recommends using the approved 5 meter Twinax cable type that is shipped with the DXi9200 system. Otherwise, Quantum recommends using optical (SFP+) connectivity. Note: The 10/25/100 GbE Copper (Twinax/DAC) cable options that Quantum provides do not support all switches. Some switch vendors allow only their cables to be used to connect the switches they produce. Please note the supported switches during the purchase-configuration process, and if the Twinax cables supplied by Quantum are not compatible with your switch, please obtain the vendor’s compatible Twinax cables from your switch vendor. Be sure to have these available before the system installation takes place.
Ethernet Cables	Note: The following cable descriptions and images do not represent each cable speed type. 10/25 GbE Optical Cable (10/25 GbE Ethernet Card) 40/100 GbE MTO/MTP Optical Cable (100 GbE Ethernet Card) 10/25 GbE Copper (DAC) Cable (10/25 GbE Ethernet Card) 40/100 GbE Copper (DAC) Cable (100 GbE Ethernet Card) CAT6 Cable
Fibre Channel Drops	2 to 8 Fibre Channel connections for path-to-tape/VTL data transfer.
Power Outlets	Node - 2 USA type 3-prong power outlets (Nema 5-15) or 2 C13 type 3‑prong power outlets (IEC320 C13). Expansion Module (each) - 2 USA type 3-prong power outlets (Nema 5-15) or 2 C13 type 3‑prong power outlets (IEC320 C13).

Interfaces

VTL backup target: 700 virtual tape drives maximum. NAS backup target:128 shares maximum (NFS or CIFS) NFS version: NFSv3 Samba version: 4.5.3 OST backup target:100 storage servers maximum

Power Supplies and Cords	Node Array Module (RBOD)	Two (2) hot-swappable redundant power supplies
		Two (2) USA type 3-prong power cords with IEC320 C13 to Nema 5-15 connectors:
		Two (2) C19 to C20 type 3-prong power cords with IEC320 C19 to IEC320 C20 connectors:
Voltage	Node	200–240 VAC
	Array Module (RBOD)	200 - 240 VAC
Frequency	Node	50–60Hz
	Array Module (RBOD)	50–60Hz
Maximum Operating	Node	5.3A @ 200V 4.4A @ 240V 1032 Watts (514 Watts at idle)
	Array Module (RBOD)	9.1A @200V 7.6A @240V 1800 Watts (1190 Watts at idle)
	System	1753 BTU/Hr (Node) 6139 BTU/Hr (RBOD)

Temperature	Operating	10° to 35°C (50° to 95°F) with a maximum temperature gradient of 10C (18F) per hour. Note: 35C is the maximum temperature for the DXi9200 at 950m (3,117ft). Reduce the maximum temperature by 1C/300m (1F/547ft) above 950m (3,117 ft).
	Shipping	–40°C to 60°C (–40°F to 140°F) with a maximum temperature gradation of 20C (36F) per hour.
	Storage	-10 to 50C (-14 to 122F) with a maximum temperature gradation of 15C (27F) per hour
Relative Humidity1	Operating	20% to 80% (non-condensing) with 26C (79F) maximum dew point with a maximum gradient of 10% per hour.
	Shipping	5% to 90% (non-condensing) with 33C (91F) maximum dew point. with a maximum gradient of 10% per hour.
	Storage	10% to 90% (non-condensing) with 33C (91F) maximum dew point. with a maximum gradient of 10% per hour
Altitude	Operating and Storage	– 16m to 3048m (– 50 to 10,000 ft)
	Shipping	-16 to 12,000m (-50 to 39,370ft)
1Atmosphere must be non-condensing at all times.

Sine Vibration	Operating	Random 0.26 G’s, 5–350 Hz (all operation orientations).
	Non-operating	Random 1.88 G’s, 10-500 Hz for 15 minutes (all six sides tested).
Shock Vibration	Operating	6 G’s for 11 ms, half-sine input, 6 shock pulses in both + and – directions operational axis
	Non-operating	71 G’s for 2 ms, half-sine input, 6 shock pulses in both + and – directions operational axis

EMC/Safety	47 CFR part 15 Class A CNS 13438 Class A CISPR 22 Class A CISPR 24 Class A EN 55022 Class A EN 55024 EN 60590-1 EN 61000-3-2 EN 61000-3-3 IEC 60950-1 ICES-003 Class A VCCI V-3/2000 Class A AS/NZS 3548 Class A KN22 Class A KN24 UL 60590-1
Immunity Tests   Standards: EN55024: 1998 +A1: 2001 +A2:2003 KN24	IEC 61000-4-2 (Ed. 2.0 2008-12) - Electrostatic Discharge (ESD) IEC 61000-4-3 (Ed. 3.1 2008-04) - Radiated RF Immunity IEC 61000-4-4 (Ed. 2.0 2004-07) - Electrical Fast Transient/Burst IEC 61000-4-5 (Ed. 2.0 2005-11) - Surge Immunity IEC 61000-4-6 (Ed. 2.2 2006-05) - Conducted RF Immunity IEC 61000-4-8 (Ed. 1.1 2001-03) - Magnetic Field IEC 61000-4-11 (Ed. 2.0 2004-03) - AC Dips and Interrupts